2.2.2.2.1. Insert Air Handling Unit
Air Handling Units (previously Insert AHU) command opens Vallox MagiCAD Selection Tool, which helps user to select the right Vallox air handling unit and insert it to MagiCAD or Revit.
When the Air Handling Units button is pressed the user is asked to select duct connections from the current view. The user can also continue without selecting the duct connections.
NOTICE: The pressure drops are available only if MagiCAD for Revit is installed. If MagiCAD for Revit does not exists, then only the airflow values are sent from Revit to the selection tool.
Next the Vallox MagiCAD Selection Tool is opened into MagiCAD Connect application.
 Market Area SelectionSelect the market area where the product needs to be available.
|
|
 Air Data Filters
If the ducts are selected, the airflow and pressure drop values are sent to the input fields in MagiCAD Selection Tool.
Rules how the airflow and pressure drop values are read from the ducts and sent to the selection tool
|
|
The airflow value is read from the supply or extract duct and value is passed to the supply or extract input field.
|
|
|
If pressure drop of the supply and outdoor ducts are calculated with MagiCAD and both ducts are selected from Revit, those values are summed before the values are passed to the supply input field (otherwise pressure drop is read from the supply duct).
|
|
|
If pressure drop of the extract and exhaust ducts are calculated with MagiCAD and both ducts are selected from Revit, those values are summed before the values are passed to the extract input field (otherwise pressure drop is read from the extract duct).
|
User can filter available air handling units in the chart by typing in required airflow and pressure drop in
the ductwork.
|
|
 AHU Selection Chart
The active air handling unit can be changed by clicking ahu from the chart.
|
|
 Product Preview
and Dimensions
There is a 3D view, image and dimension diagram available of the selected product.
|
|
 Supply Air DiagramSupply air diagram for the selected AHU (from the chart).
You can view the corresponding sound power levels on the diagram on the right.
|
|
 Extract Air DiagramExtract air diagram for the selected AHU (from the chart).
You can view the corresponding sound power levels on the diagram on the right.
|
|
 Product Data
Different product properties are listed under the Product tab. Sound power levels for the supply air can be seen on Supply air data tab and sound power levels for extract air can be seen on Extract air data tab.
|
|
 Insert AHUInsert the selected AHU product to the BIM project.
|
|
