×
Menu
Search
Search
Searching...
 
   
   
   
 
Search

2.1.1.3. Product Data

 
2.1.1.3. Product Data
 
Once you have found a product you like press the INSERT button to add it to your BIM project.
 
 
1

Variant Selection

1. Variant Selection
 
You can change the product variant selection by clicking on the variant menu on the top left corner.
 
2

3D View

2. 3D View
3D view of the product. You can freely rotate the model by grabbing it using your cursor.
 
3

Image

3. Image
Image of the product
4

Dimension Diagram

4. Dimension Diagram
An accurate dimension diagram of the product.
 
5

Ventilation Diagram

5. Ventilation Diagram
 
Select an operation point from the ventilation diagram an check the corresponding sound power levels from the ventilation data tab.
 
6

Product Details

6. Product Details
Product detail page, with product basic information and connection port sizes.
7

Classification

7. Classification
The MagiCAD Class and, if available in the database, the ETIM Group and Class codes, are shown here.
8

Ventilation Data

8. Ventilation Data
Ventilation data, sound power levels for the selected operation point from the ventilation diagram. Note that this option only shows up when an opration point has been selected in the Ventilation Diagram, as this data depends on the flow.
9

Additional options

 
These options depend on which setup the product card is opened with:
 
Via Connect with MagiCAD installed in AutoCAD, BricsCAD or Revit:
 
Via Connect in plain Revit
 
Via MagiCAD Cloud in a browser:
 
 
Permalink
Click this to get a permanent link to this product.
 
 
 
Add to Collections
If the product card is opened via Connect in plain Revit, then the products can be added to collections via this option.
 
 
Settings
This is shown if the product card is opened via MagiCAD Cloud in a browser. Here the units which are shown in the diagram can be set:
 
Note:
As this option is not shown the product card is opened directly via Connect in AutoCAD, BricsCAD or Revit these units will work in different ways:
1. If the product card is opened via Connect in MagiCAD for Revit, then the program will use the units set in Revit's settings, if these units correspond to units available in the database. Otherwise will default units be shown.
2. If the prodcut card is opened via Connect in MagiCAD for AutoCAD, BricsCAD or plain Revit, then default units will be shown.
 
 
Close
Close the product information page and return to the search.
10

Insert Product

10. Insert Product
 
Insert the selected product variant to the BIM project by clicking on the INSERT button.
11

Close Connect

11. Close Connect
 
Closes the Connect search window.

Privacy Policy. Copyright © 2024 MagiCAD Group. All rights reserved