Select product command opens Purus MagiCAD Selection Tool which helps user to select the right Purus floor drain product and insert it to MagiCAD or Revit.
When the Select product button is pressed the Purus MagiCAD Selection Tool is opened into MagiCAD Connect application.
Product configuration options are presented on the left. The configuration options conform to the selected product series. Product model information (3D model, image and dimensions image) and properties are shown on the right. The model information will be updated according to the current user selections to match the suggested product.
Select Product Series
Select the product series you would like to inspect.
The floor drain general section contains selection for floor type (installation floor material), grating, product length / dimensions and outlet position.
The floor gully section contains selection for outlet diameter, outlet type, gully material, outlet position and water trap. The outlet type option is available for Purus Channel 100 series with 50 mm diameter outlet. If low outlet type is selected, an indication of it (“LOW”) will be added to the selected product’s code.
