2.2.2.1.3. Messages, Warnings and Errors
Regarding the suggested actions for the Warnings and Errors must the users themselves make the decision on what to do, depending on their specific design case.
Messages
|
Message
|
Description
|
Actions to correct
|
|
Can not get the connect environment for the MagiCAD Connect session. Please, restart the AutoCAD or Revit.
|
The session has expired.
|
Restart AutoCAD or Revit.
|
|
Can not get the ventilation unit data for the MagiCAD Connect session. Please, restart the AutoCAD or Revit.
|
The session has expired.
|
Restart AutoCAD or Revit.
|
Warnings
|
Message
|
Description
|
Actions to correct
|
|
Specific fan power is higher than Finnish energy efficiency regulation requires
|
The results are checked for the Finnish regulations according to the National Building Code of Finland and the limitations are not fulfilled.
|
Select a device which is more suitable or adjust the flow values.
|
|
Annual efficiency is lower than Finnish energy efficiency regulation requires
|
The results are checked for the Finnish regulations according to the National Building Code of Finland and the limitations are not fulfilled.
|
Select a device which is more suitable or adjust the flow values.
|
Errors
|
Message
|
Description
|
Actions to correct
|
|
The air handling unit is not calculated. The working point is not set.
|
Flow and pressure drop are zero.
|
Set the air flow and pressure drop.
|
|
No usage hours set for the unit.
|
The hourly usage is set to zero.
|
Set the hourly usage.
|
|
...surrounding sound can not be calculated for the selected working point.
|
The working point is outside of the range.
|
Select a device which has the correct range or adjust the flow values.
|
|
...sound can not be calculated. The working point is outside of the working range.
|
The working point is outside of the range.
|
Select a device which has the correct range or adjust the flow values.
|
|
...power usage can not be calculated for the selected working point.
|
The working point is outside of the range.
|
Select a device which has the correct range or adjust the flow values.
|
|
Interpolation calculation can not be performed with the combination of input fields and a technical data.
|
For example the air flow is too high or too low.
|
Select a device which has the correct range or adjust the flow values.
|
